9kW Titanium Immersion Heater HR Industrial Immersion 9kw, 16", 1.75", 240/415v titanium immersion heater

Product Code: HRZ916C

Product Information

9kw, 16″ (406mm) immersed length, 1.75″ bsp, 240/415v immersion heater
end to end thread size: 65.71mm
heavy duty titanium element – designed for hard water areas
flexible fitting and wiring options
low watts density
flexible operational features (manual or fixed heat settings)
ip55 rotatable enclosure
single thermostat included – safety and control built into 1

Control Temp Maximum 80°C

Safety Cut-Out 90°C

£218.40 £182.00 (ex VAT)

SKU: HRZ916C.

Categories: , .

Additional information

Loading (kW)

9kw

Voltage (V)

415/240

Phase Connection

1PH, 3PH

Number of Elements

3

Length (mm/Inch)

406 / 16

Element Diameter (mm)

8

Watts Density (W/cm²)

16.5

Sheath Material

Titanium

Reviews

There are no reviews yet.

Be the first to review “9kW Titanium Immersion Heater”
Q: Hi, what is the working life of 9 kw element on a hard water tank fed system. On approximately 20 hrs a day .
— Asked by Stephen McMurray on October 27, 2020
A: The working life can vary significantly for immersion heaters, as it is very difficult to anticipate the working conditions of the unit. There are too many factors which would need to be taken into consideration when judging this. We’d suggest to choose a titanium immersion heater as this is a harder wearing sheath material compared to Incoloy or stainless steel, and is more resistant to corrosion from hard water. We’d also recommend to use a water softener. Another factor to consider is watts density. If you are able to use a 9kw element across a longer immersed length (such as 24 or 36”), this would reduce the watts density which would increase the longevity of the immersion heater. Kind regards, Hayley
— http://Hayley%20Ashford

Have a Question? Submit it here!

*
*

*