AESTB340 2¼" 3kw 16" Immersion Heater
Product Code: SH314A-AA1CA1
Product Information
This product has now been superseded by the SH314A-AA1BA1 Standard 3kW 14″ Incoloy Immersion (1¾” BSP 3kw 14″ Immersion Heater)
Click here to be re-directed to this product
Key features
– For use in water, in domestic applications
– Single thermostat pocket
– Large range of thermostats available
– product approved by NEMKO – certificate available on request
Technical data
– Material: Incoloy 800
– Loading: 3kW
– Element diameter: 8mm
– Head size (BSP): 2 ¼”
– Temperature range: 70°C Max Op Trip, 80°C Safety (depends on fitted thermostat)
– Voltage: 240V 1-Phase
– Supplied with thermostat
This is a 3kw, 15inch immersed length AESTB340 Incoloy Immersion Heater complete with combined (operating & safety cut-out) plug-in thermostat and is typically used within standard unvented domestic water cylinders. The element is bonded to the brass flange with an environmentally friendly, WRAS approved, epoxy bond, making for more robust hydraulic and corrosion proof performance.
Installed products will often carry the ThermTec brand which is owned and manufactured exclusively by Heatrod Elements. The AESTB 340 can be used in all standard domestic water areas including normal use in hard water areas susceptible to limescale. If particularly aggressive water conditions are present or the duty/usage is higher than normal then we would recommend an equivalent product with titanium element which is the AESZB340.
This immersion heater is most commonly fitted with Diamond-H WTS, Cotherm TSE00187, TSR00014 and Thermowatt RTS-3 dual function thermostats
See our “Thermostats & Controls” section for more details and to purchase these products.
The AESTB-340 is designed to meet European Standards EN 60335-2-73:2003 +A1:06 + A2:09 used with EN 60335-1:2012 for the safety of electrical appliances that heat liquids for household and similar purposes. Testing has been carried out and the product approved by NEMKO – certificate available on request
Installation Instructions for AESTB340 can be found here.
How to Measure the BSP Thread size of your Immersion Heater:
Once you have measured the thread, use the table below to select the correct BSP size: