Product Code: SH316C-BA1CA1(CESSB340)
This is a 3kw, 15inch immersed length CESSB340 Incoloy Immersion Heater complete with combined (operating & safety cut-out) plug-in thermostat and is typically used within standard unvented domestic water cylinders.. Installed products will often carry the ThermTec brand which is owned and manufactured exclusively by Heatrod Elements in Manchester.
The CESSB 340 can be used in all standard domestic water areas including normal use in hard water areas susceptible to limescale. The sheath of this product is upgraded to Incoloy 825 which gives particularly good performance in rigorous domestic usage and increased life in hard water areas.
If particularly aggressive water conditions are present or the duty/usage is higher than normal then we would recommend an equivalent product with titanium element which is the CESZB340.
This immersion heater is most commonly fitted with Diamond-H WTS, Cotherm TSE00187,
TSR00014 and Thermowatt RTS-3 dual function thermostats
See our “Thermostats & Controls” section for more details and to purchase these products.
The CESSB-340 is designed to meet European Standards EN 60335-2-73:2003 +A1:06 + A2:09 used with EN 60335-1:2012 for the safety of electrical appliances that heat liquids for household and similar purposes. Testing has been carried out and the product approved by NEMKO – certificate available on request
Installation Instructions for CESSB340 can be found here.
£46.80 £39.00 (ex VAT)
In stock
| Loading (kW) | 3kw |
|---|---|
| Voltage (V) | 240v |
| Secondary Protection | Yes |
| Length (mm/Inch) | 15″ |
| Element Diameter (mm) | 8mm |
| Stat Inches | 11 |
| Sheath Material | Incoloy 800 |
| Head Size (BSP) | C: 1.75″ BSP (1 ¾”) |
| Thermostat Type | Coltherm TSE or Thermawatt RTS-3, Cotherm TSE or Thermawatt RTS-3, Diamond-H WTS Dual Function Thermostat |
