Diamond-H WTS Push-Fit Rod Thermostat Dual Function Rod / Stem Thermostat 70°C Control, 80°C Safety

Product Information

Technical data

– 11″ length
– preset temp: 70°C Max Op Trip, 80°C Safety
– double pole
– dual function

This is a Dual Function Rod / Stem Push Fit Thermostat with adjustable trip and fixed safety cut-out aimed at standard domestic vented and unvented hot water applications.

Operational switching is achieved via single pole stem control and a manually re-settable safety cut-off is via a capillary system.

Employing a capillary system for safety allows the benefit of sensing the water or fluid temperature within the vessel rather than the surface temperature of the tank/cylinder which gives far greater accuracy in switching.

The Diamond-H WTS thermostat is CE marked and ENEC approved to EN 60730 (-1:2000, -2-9: 2002) and EN 60335 (-1: 2002, -2-73: 2002).

Push fit electrical connections are equivalent to many popular push fit thermostat types such as Cotherm TSE, Cotherm TSR, Thermowatt RTS ranges

Key benefits over competitors:

• High accuracy control
• Highest accuracy safety switching (capillary action safety sensing directly in the tank/cylinder) – particularly important where high temperatures are required in hot water applications such as thermal storage.
• Plug in system
• 20 Amp 250 V AC
• Tested to 100,000 operation cycles (higher reliability than common competitors)
• Type 2 approved control

Most commonly installed in immersion heaters fitted to cylinders from manufacturers such as Telford, R M Cylinders, Kingspan, Joule, etc.