Additional information
Sheath Material | |
---|---|
Head Size (BSP) | |
Thermostat Type | |
Stat Inches | |
Element Diameter (mm) | |
Voltage (V) | |
Secondary Protection | |
Length (mm/Inch) | |
Loading (kW) |
Product Code: HE111A
This is a 1kw, 11inch immersed length Incoloy Immersion Heater complete with combined (operating & safety cut-out) plug-in thermostat and can be used within both vented and unvented hot water cylinders. This product is aimed at a low load applications where limited energy is available such as renewable applications in conjunction with Solar panels, Ground Source and Air Source heat pumping and in Marine applications such as such as Calorifiers. The eCOHeat can be used in all standard domestic water areas including normal use in hard water areas susceptible to limescale. If particularly aggressive water conditions are present or the duty/usage is higher than normal then we would recommend a low watts density or a titanium element version which can be priced and manufactured on request.
The Cotherm TSE00187 dual function thermostat is supplied with this immersion heater – see our “Thermostats & Controls” section for more details and to purchase these products as spares items.
Installation Instructions for HE111A can be found here.
How to Measure the BSP Thread size of your Immersion Heater:
Once you have measured the thread, use the table below to select the correct BSP size:
£49.44 inc. VAT
In stock
Sheath Material | |
---|---|
Head Size (BSP) | |
Thermostat Type | |
Stat Inches | |
Element Diameter (mm) | |
Voltage (V) | |
Secondary Protection | |
Length (mm/Inch) | |
Loading (kW) |
This question has not been responded to yet.